>
CAQAupdates.

Facilities, resources and equipment under Standard 1.8: what ASQA's practice guide asks

What ASQA's practice guide for Standard 1.8 asks of RTOs: identifying facilities, resources and equipment, third parties, access, safety and placements.

Three adults wearing hard hats reviewing a laptop beside industrial equipment.

ASQA's Facilities, Resources and Equipment Practice Guide explains how it reads Standard 1.8 of the Outcome Standards, part of the Standards for RTOs 2025. The page was last updated by ASQA on 29 October 2026. ASQA says its practice guides must be read alongside the relevant legislation, so this explainer separates the binding Standard from ASQA's guidance.

What the Standard says

Standard 1.8 reads: "Facilities, resources and equipment for each training product are fit-for-purpose, safe, accessible and sufficient."

Its performance indicators, which are binding, state that an NVR registered training organisation demonstrates:

IndicatorText
(a)"how it identifies the facilities, resources and equipment required to deliver the training product, including how it identifies which facilities, resources and equipment will be provided by third parties instead of the organisation;"
(b)"where facilities, resources and equipment are provided by the organisation or third parties" ... "how the organisation ensures:"
(b)(i)"that the facilities, resources and equipment are, and will continue to be suitable and safe for use by VET students;"
(b)(ii)"that VET students have access to the facilities, resources and equipment they need to participate in the training and assessment relevant to the training product; and"
(c)"it has documented strategies and procedures in place to identify and manage risks associated with VET students using facilities, resources and equipment when undertaking work-integrated learning, work placements, or other community-based learning as part of their learning."

ASQA's page joins the two parts of indicator (b) with a dash; it is shown here as a break.

What ASQA's guidance suggests

The guide lists example activities that may demonstrate compliance. They are guidance, not additional rules. Among them:

  • identifying the facilities, resources and equipment for each training product on scope, including any AI-enabled tools
  • showing ownership or leasing arrangements, and that students have sufficient access at reasonable times to practise and demonstrate their skills
  • showing that resources are used consistently with intellectual property rights, with evidence of ownership, licensing or other permissions where required
  • systems that monitor ongoing suitability and safety, including facilities that meet health and safety requirements and building codes, equipment that is maintained, and resources that are contemporary and relevant to current industry practice
  • third-party agreements that specify who maintains facilities, resources and equipment
  • telling students before enrolment the indicative costs they will incur for resources and equipment
  • simulated environments that reflect current industry settings
  • strategies, agreed with employers, for managing risks in work placements

Known risks ASQA names

The guide also lists known risks to quality outcomes. They include maximising enrolments without considering facilities, equipment or placements; over-reliance on simulated environments or virtual observation; asking students to record assessment activities in a public space without considering privacy; leaving third-party facilities out of self-assurance; and training with resources or equipment that industry no longer uses.

Third parties remain the provider's responsibility

ASQA's FAQ states that where a third party supplies facilities, resources or equipment, the provider remains responsible for ensuring they are suitable and safe and that students have reliable access when required. It says evidence may include timetables, booking arrangements, access schedules, student information, inventories and service agreements.

The guide's case study, about a fictional provider preparing to deliver an automotive qualification, describes industry input into equipment selection, a safety induction for all facilities and equipment, and resource mapping documents that link facilities and tools to specific units.

Why it matters in assessments

ASQA's performance assessment process includes observation of facilities and of physical and virtual training and assessment equipment and resources, and information requests may include photographs of premises. Read how ASQA decides what to examine in a performance assessment for the role of risk, sampling and evidence.

ASQA's Regulatory Assessment and Monitoring Approach gives a worked example. In a regulatory campaign on commercial cookery, a targeted performance assessment found significant issues with a provider's facilities. They were not resolved within the 20-day rectification period, and the matter moved through Compliance Resolution Pathways 1 and 2 before it was closed. Another example describes a targeted assessment of early childhood education and care work placements that also covered the provider's third parties.

Points to check

Based on the guide, a provider can ask: does each training and assessment strategy name the facilities, resources and equipment it relies on, and does a register show they exist and are maintained? Are third-party arrangements written down and monitored? Can the provider show licences or permissions for the resources it uses? For providers that buy learning and assessment materials, such as those from CAQA Resources, that means keeping the licence terms and proof of purchase with the resource register.

Sources and further reading

  1. Facilities, Resources and Equipment Practice Guide
  2. Regulatory Assessment and Monitoring Approach